Background

Background：Electronic quick-shifter installation on a Triumph Rocket 3 activated the green cruise control warning light, disabled the cruise function, and logged DTC P1575 (Cruise Control Disabled).

NOTE：Post-repair of ride-by-wire/cruise control fault codes, component replacement, or adaptive value reset, a mandatory cruise control switch check is required. Omission triggers the instrument panel's green cruise warning light.

Preparation

Preparation: MOTOMASTER, M001A Main Cable

Solution

Solution：Using OBDSTAR MOTOMASTER to operate on【CRUISE CONTRONL SWITCH CHECK】function.

NOTE: Pls strictly follow your device tips in your operation process.

Details Steps:

①Select 【MOTO Diag】--【Triumph】--Latest Version to enter 【Diag】;

②Click【By system】;

③Click【ENG】;

④Click【Active Test】;

⑤Click【Cruise Control Switch Check】;

⑥click【OK】;

⑦click【Start】;

Note: After starting, please operate the switches in the order shown in the red box as prompted.

⑧Release the throttle switch as prompted by the device (this is just an example of one step in the entire operation procedure) ;

⑨All switches have been tested. Click 【Cancel】to exit the testing function ;

⑩After completing the test, use the device to clear the original fault codes ;

Summary

Pls strictly follow your device tips in your operation process.