Background

Background: A 2021 Kawasaki Z900, its maintenance time is up, the dashboard shows【SERVICE】 for maintenance tips.

The following diagram shows the Service Lamp, wrench symbol and the【SERVICE】prompt.

Preparation

Preparation: MS80, M001A, M041/N041.

Solution

Solution: Using OBDSTAR MS80 to operate on【Set the date of the next scheduled maintenance】function.

Tips

Tips: Before using the device for the【Set the date of the next scheduled maintenance】function, set the correct year and date of the vehicle via the instrument, as shown below:

Details Steps:

①Select 【MOTO Diag】--【KAWASAKI】--Latest Version to enter 【Diag】;

②Click【By system】;

③Click【METER】;

④Click【Special Function】;

⑤Click【Agree】, follow the prompts, enter the password123, Click【OK】;

⑥Click【Clock setting】Set the instrument's current date and time;

⑦click【OK】;

⑧Check the motorcycle meter's time. If incorrect, correct it by pressing 【Year/Month/Day】;

⑨Confirm there are no errors, click【yes】to complete the function;

⑩Click【Maintenance indicator display setting-Change setting value】Set the next maintenance interval and interval mileage;

⑪Click【OK】;

⑫Enter the next maintenance time in【Year/Month/Day】format and click 【OK】;

⑬Enter the next maintenance interval mileage;

⑭Confirm correct maintenance interval and interval mileage, then click【yes】to complete;

⑮Click【Maintenance indicator display setting-Indicator function】Turn off the maintenance light on the instrument;

⑯Click【OK】;

⑰Click【OFF】below to turn off the meter indicator and remove the maintenance light;

Note: In some models, vehicle issues may delay the reset signal. Even if the new maintenance interval is set successfully, the maintenance indicator may not turn off. In such cases, use the manual reset method described below.

Summary

Pls strictly follow your device tips in your operation process.