Background

Background: A 2024 BMW S1000 RR motorcycle may have limited engine speed in some cases, resulting in output power that cannot meet expectations. To further increase the engine power, it is necessary to deactivate the engine speed limitation.

Below is before deactivating engine speed limitation.

Preparation

Preparation: MS80 Motorcycle Scanner, M001A Main Cable.

Solution

Solution: Using OBDSTAR MS80 to operate【Activate/deactivate run-in engine speed limitation】in【Drive】of【Service Functions】menu.

Details Steps:

①Select【MOTO Diag】-【BMW】- latest version, enter【Diagnosis】function;

②Select【New version (-2024)】;

③Tap【Auto Identify[VIN]】;

④Tap【Read】, wait to identify the vehicle VIN code and confirm;

⑤Confirm the vehicle information, tap【Ok】;

⑥Select【Function Set】;

⑦Tap【Agree】, according to the prompt, enter the password 123, tap【Ok】;

⑧Select【Service Functions】;

⑨Select the left【Drive】and then select the right【Activate/deactivate run-in engine speed limitation】;

⑩Tap【Ok】;

⑪Select【Deactivate engine speed limitation】( Note : when the vehicle is under the engine speed limitation, the【Engine speed limitation】is【activated】, when it is not, 【Engine speed limitation】shows【deactivated】, then perform the function will activate the engine speed limitation.);

⑫The engine speed limitation was deactivated successfully, tap【OK】;

⑬Select【End】and then【Continue】to exit the operation process;

Below is after deactivating engine speed limitation.

Summary

①During the operation, please strictly follow the device instructions.

②To perform this function, operators are required to conduct the operation with due care and ensure compliance with relevant regulations and vehicle usage specifications, thereby guaranteeing driving safety.