Background

Background: The ABS / TC system of a 2024 CFMOTO CF400-8 model is disabled after the failure of ABS system, it needs to be re-enabled after dealing with the failure.

Below is the dash before startup, ABS/TC system not enabled.

Preparation

Preparation: MS80, M001A.

Solutions

Solutions: Using OBDSTAR MS80 to operate on【Function configuration】in special function of MMI1.1 system.

Details Steps:

①Select【MOTO DIAG】-【CFMOTO】- latest version, enter into【Diagnosis】function;

②【By Model】select【CF400-8】model;

③Select【Manual selection】system (【Auto Scan】is also available);

④Select【MMI1.1】system;

⑤Select【Special Function】;

⑥Tap【Agree】, according to the prompt, enter the password 123, tap【Ok】;

⑦Select【Function configuration】function;

⑧Tap【Ok】;

⑨Find the【ABS switch】and【TC switch】 functions, change the state of the right side;

⑩Change the state of the【ABS switch】and【TC switch】to (Yes, menu settings) and (ON/OFF) respectively, then tap the【carried out】button in the lower left corner;

⑪Tap【Ok】;

⑫Tap【Ok】, function execution is completed, ABS/TC system has been enabled.

Summary

Pls strictly follow your device tips in your operation process.