Tips

Tips: Pls ensure the wires connecting correctly in BENCH mode, or ECU will be broken.

Solutions

Solutions: using OBDSTAR MS80 to operate on【Make Start Key】.

Details Steps:

①Connect MS80 to Motorcycle, enter into【Moto IMMO】;

②Click【All】,  input letters such“PE” in search bar, click【PEUGEOT】;

Tips: by searching keywords, find out related models quickly.

③Click the newest PEUGEOT edition；

④Select the corresponding ECU type, such as ACI500 click【ACI500/501/502/503/504/505】;

⑤Diagnostic Connector Mode

1.Click【Diagnostic Connector Mode】;

2.Connect the diagnostic connector, click【Enter】;

Tips: can click【Diagnostic Connector】to check connecting method; click【ECU Image】to check ECU type;

3.Click【Make Start Key】;

4.Pls ensure the internet connection is normal, click【Enter】;

5.Enter a file name to save, click【Enter】;

Tips: the file folder position saved: DP-device serial number-Data 

6.Confirm the file name, click【Enter】;

7.Select the type of key generate, such as click【Master Key（5F 7D 00 00 7F 00 D6 A4）】;

8.Connect P001 with diagnostic device, click【Enter】;

9.Put the new key in P001, click【Enter】;

10.Make the key successfully.

⑥BENCH Mode:

1.Click【BENCH Mode】;

2.Connect the wires, click【Enter】;

Tips: click【BENCH mode wiring diagram】to check wiring diagram, click【ECU Image】to check ECU type;

3.Click【Make Start Key】;

4.Pls ensure the internet connection is normal, click【Enter】;

5.Enter a file name to save, click【Enter】;

Tips: the file folder position saved: DP-device serial number-Data 

6.Confirm the file name, click【Enter】;

7.Select the type of key generate, such as click【Master key（5F 7D 00 00 7F D6 00 A4）】;

8.Connect P001 with diagnostic device, click【Enter】;

9.Put the new key in P001, click【Enter】;

10.Make the key successfully.

Summary

Pls strictly follow your device tips in your operation process.