Background

When replacing tire pressure sensors with brand-new units or sensors transferred from other wheels, physical installation alone is insufficient. The unique identification code (ID) of each new sensor must be registered (or "written") into the vehicle's Body Control Module (BCM) or Tire Pressure Monitoring System (TPMS) module using a dedicated diagnostic tool.

Preparation

Preparation: MOTOMASTER, M001A, M019

Solution

Solution: Using OBDSTAR MOTOMASTER to operate on【registration ID】function.

Detail Steps:

①Select 【MOTO Diag】--【KTM】--Latest Version to enter 【Diagnosis】 ;

②Click【By model】;

③Sequentially select 【1】 >【1290】 >【1290 Super Adventure T】 >【Motorcycle (Enduro)|(2015-2020)】 ;

④Click【Manual selection】;

⑤Click【TPMS】,then click【Enter】;

⑥Click 【Special Function】, follow the prompts, enter the password 123, click【OK】 ;

⑦Click【registration ID】;

⑧Click【OK】;

⑨Confirm the old sensor ID of the front tire, then click【OK】 ;

⑩Enter the ID of the new front tire pressure sensor. (The ID can be found on the sensor’s packaging or surface. This image is just an example and should not be used as a reference.)

⑪Confirm the input is correct, then click【OK】;

⑫Confirm the old sensor ID of the rear tire, then click【OK】 ;

⑬Enter the ID of the new rear tire pressure sensor.(The ID can be found on the sensor’s packaging or surface. This image is just an example and should not be used as a reference.)

⑭Confirm the input is correct, then click【OK】;

⑮Click【OK】;

⑯Registration of front and rear TPMS sensors has been completed.

Summary

Pls strictly follow your device tips during the operation process.