Advanced Functions

P001 programmer uses dual coils with stronger signal, supporting a wider range of RFID.

1. FIAT/ALFA ROMEO/LANCIA/IVECO/ABARTH/FERRARI make dealer keys

2. VW/AUDI/SEAT/SKODA/BENTLEY/LAMBORGHINI make dealer keys

3. RENAULT/DACIA/LADA/SMART make dealer keys

4. TOYOTA/LEXUS 94/D4, 88/A8, 98, A9, 39 make simulated keys

5. SUBARU 78/F1 make simulated keys 

6. GM EPICA read pincode from original keys

7. BMW make simulated keys

8. LAND ROVER/ JAGUAR make simulated keys

9. Motorcycles make simulated keys

10. PIAGGIO/VESPA/APRILIA/GUZZ/GILERA/DERBII/PEUGEOT/ITALJETH copy keys by OBD

11. HONDA/SUZUKI/YAMAHA reading pincode

12. Read, write and fix EEPROM/PIC data

13. Renew keys

...

P001 Programmer Configurations

P001 programmer unit + C001 circuit board + C002 circuit board + W001 data cable + W002 data cable + W003 data cable

P001 programmer accessories

1. Accessory 1: C001 circuit board

• C001 circuit board is compatible with old NO. 3 and 4 circuit boards, applying to EEPROM chip dismantling and reading, Tianjin FAW and VIZHI immobilizer coil initialization and other functions.

2. Accessory 2: C002 circuit board

•  The newly developed C002 circuit board is connected by W001, W002 or W003 without welding the chip.

3. Accessory 3: W001 data cable

• W001 data cable can read or write data by linking the chip with a bonding wire

4. Accessory 4: W002 data cable

• W002 data cable can read or write data by clamping the chip (SOP 8-pin) directly without welding EEPROM. 

5. Accessory 5: W003 data cable 

• W003 data cable can read or write data by clamping positive pole and negative pole with red and black clips and contacting the data interface with yellow and blue probes.

Wiring Instruction

To better understand the connection among P001 programmer and its accessories, examples for W001 and W003 wiring instructions are as below. (During the actual operation process, there is a diagram of wiring inside tablet)  

• Way 1.  W001 Connecting

• Way 2.  W003 Connecting